Part Number Hot Search : 
ASZTMXV 2SC14 MIC2007 ISL9200 74VCX16 UDA1341 EC50A F060296
Product Description
Full Text Search
 

To Download 852-056 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  k-24 specifcations description requirement nominal impedance 75 ohms frequency range 0 C 4 ghz dielectric withstanding voltage 1300 vac sea level, 250 vac at 50,000 feet insulation resistance 5000 megohms minimum durability 500 mating cycles materials, finishes contact body, center contact, ferrule copper alloy contact fnish 50 microinches gold over nickel plating dielectric tefon? size 8 coax contacts fit aerospace-grade digital video cable. 75 ohm nominal impedance. 0-4 ghz frequency range. crimp termination. supplied as unassembled kit with contact body, center contact, outer ferrule and optional sealing boot. these snap-in, rear-release contacts ft glenair series 80 mighty mouse connectors and mil-dtl-38999 series i, iii and iv connectors with size 8 contact cavities. use with aerospace-grade video cable shown on next page. gold-plated copper alloy, tefon? insulator. size #8 coax contacts for 75 ohm video cable fig. contact type part number contact only part number contact and sealing boot sealing boot fig. 1 pin 852-056-01 852-056-01f 859-042-01 fig. 2 socket 852-057-01 852-057-01f 859-042-01 fig. 1 pin contact 852-056-01 fig. 2 socket contact 852-057-01 mighty mouse connectors with size #8 quadrax, twinax, coax or power contacts size #8 75 ohm coax contacts 852-056-01 and 852-057-01 .562 (14.27) max .625 (15.88) .006 (0.15) ?.316 (8.03) .313 (7.95) .033 (0.84) .029 (0.74) ? .0240 .0005 (0.61 0.01) .218 (5.54) hex crimp .562 (14.27) max .517 (13.13) .003 (0.08) .219 (5.56) .217 (5.51) ?.316 (8.03) .313 (7.95) .033 (0.84) .029 (0.74) .218 (5.54) hex crimp sealing boot wire dia. (in.) wire dia. (mm.) part number .090 - .130 2.3 - 3.3 859-042-01 .130 - .170 3.3 - 4.3 859-042-02 .170 - .205 4.3 - 5.2 859-042-03 plastic tool extracts wired contact from connector. first, remove sealing boot, then insert tool from rear of connector. optional sealing boot is recommended. slide boot onto wire before terminating contact. after contact is installed in connector, slide boot forward into connector grommet to seal the contact cavity. "f" sufx on contact part number specifies contact supplied with 859- 042-01 sealing boot. contact removal tool size part number military part number #8 859-049 m81969/14-12 .985 (25.02) max .326 (8.28) .350 (8.89) www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2014 glenair, inc. series 80 mighty mouse u.s. cage code 06324 printed in u.s.a. dimensions in inches (millimeters) are subject to change without notice. mighty mouse with #8 contacts k
k-25 figure part number military part number daniels part number a 809-015 m22520/2-01 afm8 b 859-072 (none) c 809-129 m22520/5-03 hx4 d 859-047 m22520/5-45 y143 e f g glenair part no. 960-130 960-131 960-132 ref. pic? part no. v75268 v76261 v73263 impedance (ohms) 75 75 75 shielding efectiveness (db) 50 90 110 video application rs170 rs170 smpte 292m first shield tinned copper braid, 95% coverage second shield none aluminized flm, 100% coverage silver plated helical copper strip, 100% temperature rating -65 to +165 c -65 to +165 c -65 to +165 c minimum bend radius 0.6 in. (15mm.) 0.6 in. (15mm.) 0.65 in. (16.5mm.) weight (lbs/100 ft.) 1.2 lbs 1.1 lbs 1.5 lbs capacitance (pf/ft) 16.0 16.0 16.0 velocity of propagation % 80 80 80 time delay 1.28 1.28 1.28 attenuation (db/100 ft) nominal max. nominal max. nominal max. 1 mhz 0.51 0.55 0.49 0.52 0.43 0.58 10 mhz 1.70 1.77 1.6 1.71 1.4 1.6 100 mhz 5.3 5.7 5.1 5.5 4.5 5.0 400 mhz 11.1 11.8 10.6 11.3 9.6 10.6 1.45 ghz 23.0 24.6 21.9 23.4 20.0 22.0 3 ghz 35.0 37.4 33.7 36.1 30.9 34.0 a m22520/2-01 crimper. requires b positioner, ordered separately. these crimp tools perform precision indents for gas-tight wire terminations and excellent tensile strength. length is 6.75 inches, weight is approx. 10 oz. e 75 ohm coaxial cable for rs170 video applications. 50 db shielding efectiveness. tinned copper braid shield. red fep jacket. f 75 ohm coaxial cable for rs170 video applications. 90 db shielding efectiveness. 100% coverage aluminized plastic foil under tinned copper braid shield. etfe jacket, white. g 75 ohm coaxial cable for smpte 292m video applications. 110 db shielding effectiveness. 100% coverage helical copper strip under tinned copper braid shield. etfe jacket, white. b positioner. use with a crimper, ordered separately. positioner holds contact at proper depth. c parallel action tool terminates cable shield to contact ferrule. use with d hex crimp dies. 11 inches oal, 2.0 pounds. anodized aluminum frame, steel mechanism, plastic handles. accepts all m22520/5 die sets. d hex die set for terminating cable shield to contact ferrule. hardened steel, black oxide fnish. termination tools for size #8 75 ohm coax contacts high performance 75 ohm coaxial cable terminate contacts to coaxial cable with precision hand tools. the inner contact is terminated to the center conductor of the cable with a m22520/2-01 hand tool and bayonet-type positioner. the outer ferrule is terminated to the cable shield with a m22520/5-01 parallel action crimper and a hex die. pic? brand video cable is specially designed and manufactured for reliable performance in aircraft systems and other harsh environments involving high temperature, emi and corrosive materials. improved strength, lower attenuation and better shielding compared with m17/94-rg179. silver-plated conductor, foamed fep dielectric, tinned copper braid, fep or etfe jacket. syydrol resistant, rohs compliant, meets faa far parts 23 and 25, appendix f fammability, complies with mil-dtl-17. a b c d etfe jacket ? .125 (3.18) tinned copper braid ? .107 (2.72) silver plated helical copper strip foamed fep dielctric ? .086 (2.18) silver-plated conductor ? .019 (0.48) fep jacket ? .122 (3.10) tinned copper braid ? .102 (2.59) foamed fep dielctric ? .086 (2.18) silver-plated conductor ? .019 (0.48) etfe jacket ? .122 (3.10) tinned copper braid ? .107 (2.72) aluminized plastic foil foamed fep dielctric ? .086 (2.18) silver-plated conductor ? .019 (0.48) mighty mouse connectors with size #8 quadrax, twinax, coax or power contacts size #8 75 ohm coax contacts 852-056-01 and 852-057-01 www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2014 glenair, inc. series 80 mighty mouse u.s. cage code 06324 printed in u.s.a. dimensions in inches (millimeters) are subject to change without notice. mighty mouse with #8 contacts k


▲Up To Search▲   

 
Price & Availability of 852-056

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X